Description
|
 Key Features:
- Compact, low-profile, and lightweight design
- Ideal for mounting on end of arm tooling or gate-cutting equipment
- “Pull” type slide for precise gate-cutting positioning (“Push” type available)
- A wide selection of various types of cutting blades sold separately
- Adjustable slide bracket stroke up to 3mm
- Cutting capacity up to ᴓ3.5mm soft plastic or ᴓ2.3mm hard plastic
- Mounting holes on bottom of slide bracket
- One-touch quick connection 4mm air tube fitting
- Single action with spring return
- Weight: 210g
|
The VESSEL GT-NY10-4 is an exceptional horizontal sliding air nipper for mounting on end of arm tooling (EOAT) or on automated gate-cutting stations due to its compact, low-profile, and lightweight design. It features an adjustable “Pull” type bottom slide bracket for precise positioning against the gate leaving a flush cut finish. The “Push” type model #GT-NY10R-4 is also available.
The GT-NY10-4 pull type sliding air nipper body uses the NY10-series forward type cutting blades.
Specifications
 |
Model No. |
Air Consumption (cm3/str.) |
Air Pressure (MPa) |
Weight (g) |
Slide Direction (mm) |
Air Hose Port (mm) |
EDP No. |
GT-NY10-4 |
68 |
0.4 ~ 0.5 |
210 |
Pull 0~3 |
ID: Ø2.5 OD: Ø4 |
360660 |
|
|
0.4MPa = 58.02psi / 0.5MPa = 72.5psi |
|
Capacity (ᴓ) mm |
Model No. |
Soft Plastic
|
Hard Plastic |
Copper |
Steel |
Piano |
Solderless Terminals |
GT-NY10-4 |
3.5 |
2.3 |
- |
- |
- |
- |
|
*Steel: Non-heat treated / Piano: HV320 or below |
|
The capacity in the above table is given for reference only, when mounting a standard type of blade. The capacity depends on the blade shape and the material of the object to cut. Capacity (ᴓ) is for reference purposes only as it varies depending on products.
Air hose inner diameter is 5mm and the overall length and weight does not include accessories.